MVI56E-GEC ♦ ControlLogix Platform
Using ProSoft Configuration Builder
Generic ASCII Ethernet Communication Module
User Manual
ProSoft Technology, Inc.
Page 17 of 80
2.3
Ethernet 1 Configuration
Use this procedure to configure the Ethernet settings for your module. You must
assign an IP address, subnet mask and gateway address. After you complete
this step, you can connect to the module with an Ethernet cable.
1
Determine the network settings for your module, with the help of your network
administrator if necessary. You will need the following information: IP address
(fixed IP required), Subnet mask, Gateway address
Note: The gateway address is not required for networks that do not use a default gateway.
2
Double-click the
E
THERNET
1
icon.
3
This action opens the
Edit
– Ethernet 1
dialog box.
4
Edit the values for
my_ip
,
netmask
(subnet mask) and
gateway
(default
gateway).
5
When you are finished editing, click
OK
to save your changes and return to
the
ProSoft Configuration Builder
window.
