manualshive.com logo in svg

ProSoft Technology RLXIC-SG, Руководство пользователя, Страница: 95 / 136

Поделиться
Скачать
ProSoft Technology RLXIC-SG Скачать руководство пользователя страница 95

Configuration Commands 

RLXIC-SG 

♦

 Intelligent Cellular 

User Manual 

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM 

 

 
ProSoft Technology, Inc. 

Page 95 of 136 

May 29, 2009 
 

 

DS=n 

Allows a PPP connection to be initiated on the host port. 

ƒ

 

n=2

 : Initiates the PPP connection. 

Cannot be configured in AceManager.

 

Hn 

Hang-Up Command. 

ƒ

 

n=1

 : Hang-up 

With an AT telnet connection, this command will terminate the host data mode, 
and return the RLXIC-SG to an AT mode. Cannot be accessed in AceManager. 

O 

Online (Remote): Causes the RLXIC-SG to go from Command State to data 
state. Cannot be configured in AceManager. 

OPRG=n 

Enables/disables over-the-air firmware upgrading of the RLXIC-SG. When 
ProSoft Technology releases a new version of ALEOS, you can upgrade your 
remote modems with OPRG enabled. 

ƒ

 

n=0

 : Disables 

ƒ

 

n=1

 : Enables 

S53=[method][d.d.d.d][/ppppp] 

Destination IP address, port, and method. These are used as defaults for the D 
(Dial) AT command. 

ƒ

 

method= P

 : UDP 

ƒ

 

method=T

 : TCP 

ƒ

 

method=N

 : Telnet 

ƒ

 

d.d.d.d=

IP address or domain name 

ƒ

 

ppppp=

the port address 

Examples: 

ATS53=T192.168.100.23/12345

 

ATS53=foo.earlink.com

 

Telnet to the specified IP at port 12345. 

ATS53=192.168.100.23/12345

 

Query the specified IP at port 12345. 

ATS53=/12345

 

Query port 12345. 

Содержание RLXIC-SG









































































































































Отзывы:

Нет отзывов