ProSoft Technology RLXIC-SG Скачать руководство пользователя страница 102

Страница: 102 / 136

RLXIC-SG

♦

Intelligent Cellular

Configuration Commands

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM

User Manual

Page 102 of 136

ProSoft Technology, Inc.

May 29, 2009

Tip:

Flow control (AT\Q) will override this indication, so if you want to use CTS to indicate network

coverage, flow control has to be off (AT\Q0).

*MODEMHISPEED

Set the internal serial link speed to the internal (radio) module.

n=0

: 115200 and 38400 for iDEN (default)

n=1

: 230400 and 115200 for iDEN

n=0

: 115200 (default)

n=0

: 38400 (default)

n=0

: 115200 (default)

n=0

: 38400 (default)

n=1

: 230400

n=1

: 115200

This command is only available with CDMA, iDEN, EDGE, or GPRS modems.
May not be available for all modem models.

*NUMTOIP=n

Convert 12 digit number to IP.

n=0

: Use as name.

n=1

: Use as IP address.

*PPPNOCARRIER=n

Provides a "No Carrier" message to a device connected to the serial port using
PPP or CHAP when the cellular connection becomes unavailable.

n=0

: Disabled (Default).

n=1

: Enabled.

11.3.3 TCP

This group includes commands specific to TCP serial communications.

Содержание RLXIC-SG









































































































































Результаты поиска

Содержание RLXIC-SG

Отзывы:

ProSoft Technology RLXIC-SG, Руководство пользователя, Страница: 102 / 136

Результаты поиска

Содержание RLXIC-SG

Отзывы: