ProSoft Technology RLXIC-SG Скачать руководство пользователя страница 90

Страница: 90 / 136

RLXIC-SG

♦

Intelligent Cellular

Configuration Commands

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM

User Manual

Page 90 of 136

ProSoft Technology, Inc.

May 29, 2009

*NETPHONE?

The modem's phone number, if applicable or obtainable.

View active profile, the contents of the active registers.

Not displayed with

AceManager.

n=0

: Product name (for example, RLXIC-SG).

n=1

: The RLXIC-SG's firmware (ALEOS) version, hardware ID, and

n=2

: The internal hardware's firmware version, and relevant hardware ID.

n=3

: The hardware module's unique identification number or serial number.

n=5

: View active profile (the contents of the active registers).

Not displayed

with AceManager.

11.1.1 Information Displayed in AceManager without AT Commands

Listed

Versions of ALEOS, internal hardware, boot, and MSCI

: Versions of

internally configured hardware and software.

Содержание RLXIC-SG









































































































































Результаты поиска

Содержание RLXIC-SG

Отзывы:

ProSoft Technology RLXIC-SG, Руководство пользователя, Страница: 90 / 136

Результаты поиска

Содержание RLXIC-SG

Отзывы: