ProSoft Technology RLXIC-SG Скачать руководство пользователя страница 18

Страница: 18 / 136

RLXIC-SG

♦

Intelligent Cellular

Activating RLXIC-SG on your cellular provider

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM

User Manual

Page 18 of 136

ProSoft Technology, Inc.

May 29, 2009

Tools Required

Small Phillips screw driver

- The Phillips screw driver is the one which is

also called a plus (+) or X screw driver.

3.1.2 Opening the Case

Unplug the RLXIC-SG power and all cables.

Using a small Phillips head screw driver, remove the screws on the front of
the RLXIC-SG.

3.1.3 Remove the SIM from the card

Carefully remove the SIM card from the card you received from your cellular
provider.

3.1.4 Insert

the

SIM

Gently press the SIM card to secure in place.

Note:

The card and SIM may be a different color than these examples.

Gently press the SIM to click it into place.

Tip:

The top of the card faces the bottom of the modem.

3.1.5 Finishing the SIM installation

When the faceplate is replaced and secured, the installation of the SIM is
complete.

Содержание RLXIC-SG









































































































































Результаты поиска

Содержание RLXIC-SG

Отзывы:

ProSoft Technology RLXIC-SG, Руководство пользователя, Страница: 18 / 136

Результаты поиска

Содержание RLXIC-SG

Отзывы: