ProSoft Technology MVI69E-MBTCP Скачать руководство пользователя страница 10

Страница: 10 / 150

Start Here

MVI69E-MBTCP ♦ CompactLogix Platform

User Manual

Modbus TCP/IP Enhanced Communication Module

Page 10 of 150

ProSoft Technology, Inc.

June 28, 2017

1.1

System Requirements

The MVI69E-MBTCP module requires the following minimum hardware and
software components:



Rockwell Automation CompactLogix

processor (firmware version 10 or

higher), with compatible power supply and one free slot in the rack, for the
MVI69E-MBTCP module.

Important: The MVI69E-MBTCP module has a power supply distance rating of 4 (L43 and L45

installations on first 2 slots of 1769 bus). It consumes 500 mA at 5 Vdc.

Important: For 1769-L23x processors, please make note of the following limitation:

1769-L23E-QBFC1B = 450 mA at 5 Vdc (No MVI69E module can be used with this processor.)



The module requires 500 mA of available 5 Vdc power



Rockwell Automation RSLogix 5000 programming software version 16 or

higher



Rockwell Automation RSLinx

communication software version 2.51 or higher



ProSoft Configuration Builder (PCB) (included)



ProSoft Discovery Service (PDS) (included in PCB)



Pentium

II 450 MHz minimum. Pentium III 733 MHz (or better)

recommended



Supported operating systems:

Microsoft Windows

Microsoft Windows Vista

Microsoft Windows XP Professional with Service Pack 1 or 2

Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3

Microsoft Windows Server 2003



128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended



100 Mbytes of free hard disk space (or more based on application

requirements)



256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color

1024 x 768 recommended)

Note: The Hardware and Operating System requirements in this list are the minimum
recommended to install and run software provided by ProSoft Technology

. Other third party

applications may have different minimum requirements. Refer to the documentation for any third

party applications for system requirements.

Содержание MVI69E-MBTCP























































































































































Результаты поиска

Содержание MVI69E-MBTCP

Отзывы:

ProSoft Technology MVI69E-MBTCP, Руководство пользователя, Страница: 10 / 150

Результаты поиска

Содержание MVI69E-MBTCP

Отзывы: