Contents
MVI69-GEC ♦ CompactLogix or MicroLogix Platform
User Manual
Page 38 of 86
ProSoft Technology, Inc.
February 18, 2014
2
Double-click the I/O Configuration icon located in the Controller folder in the project tree.
This action opens the I/O Configuration dialog box.
3
On the I/O Configuration dialog box, select "Other - Requires I/O Card Type ID" at the
bottom of the list in the right pane, and then double-click to open the Module dialog box.
4
Enter the values shown in the following illustration to define the module correctly for the
MicroLogix processor. Click OK to save your configuration.
The input words and output words parameter will depend on the Block Transfer Size
parameter you specify in the configuration file. Use the values from the following table.
Block Transfer Size
Input Words
Output Words
64
64
64
5
Click
Next
to continue.
