ProScan HDTV, Руководство пользователя

Страница: 69 / 100

System Options and Preferences
65
AUTO TUNING
This menu displays the various components you have connected to your TV. It lets you
set up the TV to automatically tune to the correct input channel when you press a
device button (VCR1, VCR2, or DVD) on the remote control.
1. Use the arrow buttons on the remote control to highlight the field corresponding
with a device.
Selecting any of the fields on this screen enables you to specify which input or
channel the component will use.
2. Press the OK button on the remote to choose which input channel you want to
tune to when you press that device button. Choices for each device are:
Not Connected Select this if you don’t have that device connected to the antenna
or video input jack on the back of the TV or if you don’t want the TV to tune to a
channel when the particular device button (VCR1, VCR2, or DVD) is pressed.
Ch 2 (or 3 or 4) - Ant A Select this if your device is connected to Antenna A on
the back of the TV and you want the TV to tune to channel 2 (or 3 or 4) when you
press the device button (VCR1, VCR2, or DVD).
Ch 2 (or 3 or 4) - Ant B Select this if your device uses Antenna B on the back of
the TV and you want the TV to tune to channel 2 (or 3 or 4) when you press the
device button (VCR1, VCR2, or DVD).
Video INPUT 1 (or 2 or 3) Select this if your device is connected to the Video
INPUT 1 (or 2 or 3) jack on the back of the TV and you want the TV to tune to the
input channel VID1 (or VID2 or VID3) when you press the button. If you have an S-
Video cable connected, the input channel will read S-VID1 (or S-VID2 or S-VID3).
Cmpnt Video (Component Video Input) Select this if your device is connected to
the COMPONENT VIDEO INPUT jack on the back of the TV and you want the TV
to tune to the input channel CMPNT when you press the device button (VCR1,
VCR2, or DVD).
3. Now you can use the device buttons (VCR1, VCR2, or DVD) on the remote control
to tune to the correct input channel when you press the button.
If you have programmed your remote control and completed the above steps to auto
tune, you can—for example—press the VCR button and both tune to the VCR’s input
channel and enter into “VCR mode.” You can then begin using the REVERSE, PLAY,
FORWARD, RECORD, STOP, and PAUSE buttons to control your VCR.
Reminder : Make sure
the Ch 2/3/4 switch on
the back of the
component is set to the
channel you specify in
the Auto Tuning screen.