System Options and Preferences
64
CHANGING THE SIGNAL SOURCE
The Signal Source menu allows you to choose the source from which you would
like the signal to come: Antenna A, Antenna B, DIRECTV, or Video Inputs. The same
can be accomplished using the ANTENNA, DIRECTV, and INPUT buttons on your
remote control. If you misplace your remote control, use the front panel buttons to
access this menu and change the signal source.
To access the Signal Source menu:
1. Press MENU on the remote control to access the main menu.
2. Select
System Options from the main menu.
3. Select
Signal Source from the next menu.
Select the appropriate signal source.
4. Use the arrows and OK to select which source from which you would like to
receive a signal.
CHANGING THE SIGNAL TYPE
The Signal Type menu lets you choose whether you are receiving a signal from
cable TV or an off-air antenna. When you run Channel Search (see “Channel
Search” in this section for details), the TV automatically detects your signal and you
don’t have to specify it here. However, if you decide to change the source, you will
need to use the Signal Type menu. Note that when your signal source is coming
from DIRECTV, this menu will not be available.
Select whether you are receiving signals from an off-air antenna or cable.
Note that viewing a VCR
while in AIR mode may
result in poor picture
performance. If you
have a VCR connected
to Antenna A or Antenna
B, set the Signal Type to
Cable for that Antenna.
Содержание HDTV
