Propress PRO580, Руководство пользователя

Страница: 12 / 27

10 PRO580 USER MANUAL: Operating & Safety Instructions
4.3 Using Your Steamer
NOTE: Ensure the area you are steaming in is well ventilated.
Once steam is emitting from the nozzle, allow the hose and nozzle
to get hot for approximately 30 seconds before using the steamer.
This reduces any condensation build-up.
Lift hose handle from the hook, shake/flick nozzle vigorously to remove
any excess condensation before use and repeat periodically when
steaming garments.
4.4 Standby Setting
To use standby, once you have steam coming from nozzle, switch
control knob to standby mode, in standby the amber light will illuminate
intermittently. Standby mode ( ) will maintain water temperature just
below boiling point (occasional puffs of steam may appear from nozzle).
From standby, steam will be regenerated in seconds when control knob
is switched back to steam position. The steamer may be left in standby
mode for as long as required.
NOTE: When steamer has been left in standby mode, condensation
can occur in the steam nozzle, after switching back to steam
allow nozzle to heat and shake nozzle before use to remove any
condensation (see 4.3 Using Your Steamer)
4.5 Safety Filler Cap
Your steamer is fitted with a safety filler cap. In some circumstances
steam or water can be released from the filler cap. In the event that
this occurs turn off immediately to ensure no damage is caused to
the steamer or hose. DO NOT REMOVE THE FILLER CAP. WAIT FOR
STEAMER TO COOL DOWN.
The potential causes of this are:
• The steamer has been overfilled
• The steamer needs rinsing out and descaling to remove build up of
sediment or limescale
• The steamer hose is blocked, kinked or restricted
4. OPERATING INSTRUCTIONS (CONTINUED)