Propress PRO580, Руководство пользователя

Страница: 18 / 27

16 PRO580 USER MANUAL: Operating & Safety Instructions
6.3 Descaling your Steamer
Before descaling, carry out 6.2 Cleaning your Steamer to remove as
much loose sediment as possible.
Always read Caution Instructions on descaling product and carefully
follow directions.
Dissolve/dilute descaler in warm water, or as directed by the
manufacturer, ensuring the correct water volume to descaler ratio is
followed. Pour the diluted descaler solution into the steamer.
Replace filler cap and switch on the steamer.
As soon as water starts to boil, switch off, disconnect power and leave
for a minimum of 3 hours. For best results leave to descale overnight.
Before flushing descaler from the steamer, agitate vigorously then
empty water out of steam outlet. Refill with clean water, agitate
and flush out again. Repeat this procedure until the water drained is
completely clear.
Failure to maintain your steamer will void its warranty.
NOTE: the water in the steam generator must be allowed to cool to a
temperature which will not cause injury before emptying.
6.4 General Maintenance
In addition to mandatory electrical tests, regularly check the condition
of the steamer's plug, cable and cable restraint for damage. If any
damage is present DO NOT USE THE STEAMER and contact an
approved service agent for repair. Ensure all warning labels are legible.
6. CARE AND MAINTENANCE (CONTINUED)
When descaler is left in the steamer, clearly label your
steamer so no one attempts to use it.