15
6. CARE AND MAINTENANCE
6.1 Maintaining your Steamer
To ensure a long and trouble free life of your steamer it is essential that
it is flushed through with clean water every week to avoid the buildup
of sediment and limescale. Descale regularly to ensure no unnecessary
strain is put upon the heating element. Hard water causes scale to form
on the heating element if not maintained properly; this will cause reduced
performance, irreparable damage to the element and void your warranty.
6.2 Cleaning your Steamer
Disconnect from the power supply.
Remove steam hose and telescopic pole assembly.
Steamer must be disconnected from the power supply.
The water in the steamer must be allowed to cool to a
temperature which will not cause injury before emptying.
NOTE: The steamer should be emptied through the steam outlet (not the
filler inlet) into a ground level drain where possible to avoid raising the
steamer up and emptying into a sink.
Start by emptying any residue water from the steamer.
Remove the filler cap and fill steamer with 2L of clean water, replace the
filler cap and agitate vigorously – this action will suspend some sediment in
the water, immediately pour water out as directed above. Refill steamer with
fresh water and empty again, repeat procedure until the water runs clear.
Periodically remove the sight glass on the indicator float chamber and clean
the inside with a damp cloth to ensure you can see the float through the cap.
Clean the outside of the steamer with a damp cloth. Do not use any
detergents or polish.
It is recommended the steamer be descaled using a non-aggressive descaler
at least every 2 months. Descaling frequency is dependent upon usage and
water hardness.
For details on suitable descalers, please contact Propress. We recommend
the use of Propress Descaler which can be purchased by calling Propress on
020 8417 0660 or visiting propress.co.uk.
Содержание PRO580
Страница 27: ......
