V1.0
TOOL SHARPENER
8680944
Visit www.princessauto.com for more information
11
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
NOTICE! Do not attempt to use the tool until the packing
foam is removed as this may damage the tool’s components.
Remove the parts and accessories from the packaging and inspect
for damage. Make sure that all items in the parts list are included.
Additional steps are required when unpacking the tool sharpener.
1. The motor drive shaft is supported by foam. Carefully tilt
the machine on its side and remove the foam
2. Place the machine on its back. Hold the motor in place,
then remove the foam. Carefully return the motor to the
upright position.
Contents:
• Tool Sharpener
• Grinding Wheel
• Leather Stropping Wheel
• Grinding Jig
• Water Reservoir
• Universal Support
• Honing Compound
• Angle Guide
IDENTIFICATION KEY
A Grinding Jig
B Horizontal Mounts with
Knobs
C Leather Stropping Wheel
D Universal Support
E Grinding Wheel
F Water Reservoir
G Honing Compound
H Vertical Mounts with Knobs
I
Bidirectional ON/OFF
Switch
J Angle Guide
Fig. 1
