PROPOINT 8977084, Руководство пользователя

Страница: 12 / 32

8977084 TRUBLU LoPro Welding Mask Kit V1.0
12 For technical questions call 1-800-665-8685
REMOVING AND REINSTALLING THE
FACEPLATE
The faceplate is held in place by a lock and tab system on either side of
the goggles, just behind the control panel and grind button.
1. Press the left tab outward to free
it from the lock and hold it there.
2. At the same time, hold the onto
the faceplate and press against
the goggles on the same side.
The faceplate will pop off.
3. Repeat steps 1 and 2 on the
other side. Set the faceplate
aside once it is free.
4. Reattach the faceplate by aligning the locks and tabs on either side
of the goggles and faceplate.
5. Push the goggles down into place until the tabs catch onto the
locks. Check that the connection is firm on each side.
6. Clean the lenses of fingerprints after removing or installing the
mask.
CLEANING
Clean the lens, welding mask shell and headband with a soft cotton
cloth and mild soap. Replace the headband when required.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
Fig. 15