PROPOINT 8977084, Руководство пользователя

Страница: 13 / 32

V1.0 TRUBLU LoPro Welding Mask Kit 8977084
Visit www.princessauto.com for more information 13
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not
function properly or parts are missing. If unable to do so, have a
qualified technician service the tool.
PROBLEM(S) POSSIBLE CAUSE(S) SUGGESTED SOLUTION(S)
Irregular
Darkening. Headgear is set unevenly so
the distance between the eyes
and the lens is different from
the left to the right side. Adjust headgear so distance
is equal between the lens and
both eyes.
Filter does not
darken or
flickers. 1. Front cover lens is dirty or
smoke covered.
2. Arc sensors may be dirty.
3. Welding current is too low.
4. Battery voltage is too low.
1. Clean or replace external
lens.
2. Remove external lens and
wipe the photo sensors
clean with soft lint free
cloth.
3. Adjust filter sensitivity to
the maximum.
4. Replace batteries.
Poor vision. 1. Check the clear covers
lenses and the electronic
filter lens for dirt or grime.
2. Protective film was not
removed.
3. Ambient light is not
sufficient to see.
4. Shade Number is not set
correctly.
1. Clean cover lenses and
electric filter lens.
2. Remove protective film.
3. Adjust the work area
lighting.
4. Reset Shade number.
Welding Cap
slips. The headband is not properly
adjusted. Adjust the headgear tightness
adjusting knob for a tighter fit.