Emit Section
Emit Section Front Panel
Emit Section Back Panel
Rate
Sets the frequency at which grains are created. When tempo sync is disabled, the range is from 0Hz (Off) to
500Hz. When tempo sync is enabled,
the available rates are: 32/4, 28/4, 24/4, 20/4, 16/4, 12/4, 8/4, 7/4, 6/4,
5/4, 4/4, 7/8, 3/4, 5/8, 2/4, 7/16, 5/8T, 3/8, 4/8T, 5/16, 1/4, 3/16, 2/8T, 1/8, 1/8T, 1/16, 1/16T, 1/32, 1/32T, 1/64,
1/128.
Rate Length Link
Enabling the
Rate Length Link
will cause the
Length
of grains to be inversely proportional to the emit
Rate
. If
the emit
Rate
goes up, the
Length
of the grains decreases. If the emit
Rate
goes down, the grain
Length
increases. This helps create a steady number of active grains when the rate fluctuates.
Rate change with Link enabled. Rate increases cause length decreases.
Rate change with Link disabled. Rate increases does not affect length.
7
