Gate
Gate
determines whether the emitter is active or not. If
Gate
is off, no grains will be emitted. Turning the
Gate
off and then adding modulation can create rhythmic grain emissions. There is an additional CV input on the
back for controlling the gate.
Jitter
Jitter
is random noise added to the emitter clock timing. If the emit
Rate
is set at 10Hz, a grain will be emitted
every 100ms. A
Jitter
of 100% would cause each grain’s start to randomly be shifted 0ms to 100ms.
Jitter
does not affect
Length
, only emission time.
Jitter 0%
Jitter 50%
Jitter 100%
Trigger
Trigger CV Input
will cause a single grain to be emitted. This overrides any current
Gate
value.
9
