Main outputs
Type
Impedance
Max.output level
XLR electronically balanced
approx. 240 bal./ 120 unbal.
Ω
Ω
+28 dBu
Control room outputs
Type
Impedance
Max.output level
1/4
＂
TS connector, unbal.
approx. 120
Ω
+22 dBu
Stereo aux return
1/4" TRS connector, electronically balanced
Type
approx. 20 k bal. /10 k unbal.
Ω
Ω
+22 dBu
Impedance
Max.input level
Headphones output
Type
Max.output level
1/4" TRS connector, unbalanced
+19 dBu / 150
(+25 dBu)
Ω
Type
Impedance
Max.output level
1/4" T
S connector, unbalanced
approx. 20 k
Ω
+22 dBu
Aux sends
·
Power Supply
The apparatus should be connected to the power supply only of the type as marked
on the apparatus or described in the manual. Failure to do could result in damage
to the product and possibly the user.
Unplug this apparatus during lightning storms or when unused for long periods
of time.
·
Ventilation
Do not block areas of ventilation opening. Failure to do could result in fire. Always
install accordance with the manufacturer's instructions.
·
Fuse
To prevent the risk of fire and damaging the unit, please use only of the recom-
mended fuse type as described in the manual. Before replacing the fuse, make
sure the unit turned off and disconnected from the AC outlet.
·
Electrical Connection
Improper electrical wiring may invalidate the product warranty.
·
Cleaning
·
Object and Liquid Entry
Clean only with a dry cloth. Do not use any solvents such as benzol or alcohol.
·
Servicing
Do not implement any servicing other than those means described in the manual.
Refer all servicing to qualified service personnel only.
·
Only use accessories/attachments or parts recommended by the manufacturer.
·
Warning
Please remember the high sound pressure do not only temporarily damage your
sense of hearing, but can also cause permanent damage. Be careful to select a
suitable volume.
Objects do not fall into and liquids are not spilled into the inside of the apparatus
for safety.
·
Power Cord and Plug
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Do not defeat the safety purpose of the polarized or grounding-type plug. A pola-
rized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, refer to
electrician for replacement.
PMX Series Mixer
17
24-bit Texas Instruments
24-bit Sigma-Delta.
64/128-times oversampling
40 kHz
DSP
Converter
Sampling rate
-105 dB / -108 dB A-weighted
-95 dB / -97 dB A-weighted
-82.5 dB / -85 dB A-weighted
2
Main mix system data
Noise
Main mix @ -
∞
,
Channel fader -
∞
Main mix @ 0 dB,
Channel fader -
∞
Main mix @ 0 dB,
Channel fader @ 0 dB
100 -240 V~, 50/60 Hz
200 W
Standard IEC receptacle
100 -240 V~, T10AH 250V
100-240 V~, 50/60 Hz
1000 W
Power supply
PMX1204FX
Mains voltage
Power consumption
Fuse
Mains connection
PMX1404FX/PMX1604FX/PMX1804FX
Mains voltage
Power consumption
Fuse
Mains connection
Standard IEC receptacle
100-120V, T10AH
200-240V, T5AH
