PRONAR ZKP800, Руководство оператора, Страница: 79 / 102

SECTION 5 Pronar ZKP800
5.11
Oil in intersecting axis gear must be changed after the first 50 hours of work. The next oil
change should be made after 500 hours of rotary rake work or once a year, whichever
occurs first.
FIG. 5.4 Changing oil in intersecting axis gear
(1) filler plug, (2) inspection plug, (3) drain plug
To change oil in intersecting axis gear:
•
set rotary rake on a hard and level surface
•
unscrew filler plug (1) and inspection plug (2),
•
unscrew drain plug (3) and drain oil to previously prepared basin,
•
if oil Manufacturer recommends flushing transmission, that operation should be
performed according to the guidelines of the oil Manufacturer (guidelines may be
detailed on packaging),
•
tighten drain plug (3),
•
add oil until oil flows out of inspection opening (2),
•
Tighten inlet and inspection plugs.
Used oil should be taken to the appropriate facility dealing with the re-use of this type of
waste.