PRONAR ZKP800, Руководство оператора, Страница: 51 / 102

SECTION 4 Pronar ZKP800
4.3
visually inspect the rotary rake individual components for mechanical damage
resulting from incorrect loading, transport or unloading of the machine,
check technical condition of the rotary rake lights and indicators,
check technical condition of PTO shafts and their shields as well as
completeness of these elements,
check technical condition of hydraulic lines,
check that there are no hydraulic oil leaks.
4.1.2 PREPARING THE ROTARY RAKE FOR THE FIRST USE
When preparing the rotary rake for the first use, check the following:
all lubrication points, lubricate the machine elements as needed according to
recommendations provided in section 5.5 LUBRICATION,
check if the nuts fixing the following components are properly tightened:
(raking arms, springtines, wheels, protective shields),
oil level in intersecting axis gear of drive system,
technical condition of PTO shafts, their shields and securing chains,
technical condition of hitching system pins and locking cotter pins,
make sure that the attached PTO shaft may be connected to the tractor (PTO
shaft should be suitable for the tractor – see the Operator's Manual of PTO
shaft),
check length of PTO shaft in the most favourable and difficult
working conditions,
check whether the PTO shaft pipes are sufficiently covered
when the widest angle is set,
check whether the PTO shaft can be still slid when the
smallest angle is set (while turning),
check correct PTO shaft rotation speed.