PRONAR ZKP800 Скачать руководство пользователя страница 61

Страница: 61 / 102

SECTION 4

Pronar ZKP800

4.13

DANGER

Raking arms should be dismantled and mounted with tractor engine turned off. Remove
the key from the ignition, ensure that unauthorised persons do not have access to the
tractor. Tractor shall be immobilised with parking brake.

4.5

ROTARY RAKE OPERATION

4.5.1 SETTING ROTARY RAKE IN WORKING POSITION

Rotary rake transported to the field must be set in appropriate working position. Preparing of

the machine for work must only take place exclusively on level and stable surface. Perform

the following actions in order to set the rotary rake in working position:

stop tractor and remove the key from the ignition, ensure that unauthorised

persons do not have access to the tractor,

immobilise tractor with parking brake,

set lifting cylinder valve (3) in open position I- figure (4.3),

release lock (2) by pulling cable (1) (figure (4.3)) and by operating the tractor's

hydraulic circuit, lower lifting arms with raking assemblies so that the wheels

touch the ground and set tractor's hydraulic circuit in float position,

If the raking arms (1) were dismantled, remount them by sliding them into arm

mount (2) and secure with cotter pin (3) – figure (4.4).

DANGER

Before setting the rotary rake in working position or transport position make sure that
there are no bystanders in the danger zone.

Содержание ZKP800







































































































Результаты поиска

Содержание ZKP800

Отзывы:

PRONAR ZKP800, Руководство оператора, Страница: 61 / 102

Результаты поиска

Содержание ZKP800

Отзывы: