PRONAR T386, Руководство оператора, Страница: 106 / 162

Pronar T386 SECTION 4
4.38
Set the load box position on
the trailer frame, depending
on the load box length.
Press and hold the push-button for extending
the hook frame until the required position of
the load box is achieved.
The trailer must be set to "tipper" mode –
indicator light (9) is ON - figure (4.8).
Lock the load box.
Press and hold the push-button for extending
the load box interlock.
When indicator light (16) lights up, figure
(4.8) , keep the push-button pressed for 2-3
seconds.
Set the rear bumper position
(if the load box projects more
than 400mm).
Press and hold the push-button for extending
the rear fender until the required position of
the rear fender is achieved.
The maximum distance between the rear
fender and the rearmost point of the vehicle
(load box) should not exceed 400mm.