PRONAR T386, Руководство оператора, Страница: 103 / 162

SECTION 4 Pronar T386
4.35
pressure on the wall. If the load box is equipped with the rear hydraulic wall,
use the control panel.
Press and hold the push-button (17) or (18) - figure (4.8) until the load
box wall is completely opened.
WARNING
Symbols in the form of arrows (17), (18) - figure (4.8) located on the control panel do not
define rising or lowering direction (it depends on the load box connection method).
If needed, unlock the load
box (if the load box
position should be
changed).
Press and hold the push-button for
withdrawing the load box interlock.
Indicator light (15) must light up - figure
(4.8). When indicator light lights up, keep
the push-button pressed for 1-2 seconds.
Set the load box position
on the trailer frame,
depending on the load
box length.
Shift the hook frame to the rear by
pressing the push-button for withdrawing
the hook frame.
The trailer must be set to "tipper" mode –
indicator light (9) is ON - figure (4.8)