PRONAR T314, Руководство пользователя

Страница: 76 / 114

Pronar T314, Pronar T315, Pronar T316 SECTION 5
5.8
Tightening nuts
TAB. 5.1 Connections of wheels with axle
SLURRY TANKER PIN THREAD ITEMS
T314 M18x1.5 6
T315 M18x1.5 8
T316 M22x1.5 10
Nuts should be tightened gradually diagonally, (in several stages, until obtaining the required
tightening torque) using a torque spanner. If a torque spanner is not available, one may use
an ordinary spanner. The arm of the spanner (L) Figure (5.6) should be selected according to
the weight of the person (F) tightening the nut. Remember that this method of tightening is
not as accurate as the use of a torque spanner.
TIP
Nuts with M18x1.5 thread should be tightened using the maximum torque of
270 Nm.
Nuts with M22x1.5 thread should be tightened using the maximum torque of
510 Nm.
Checking wheel tightening:
•
after the first use of the machine,
•
after first travel with load,
•
after travelling the first 1,000 km
•
every six months use or every 25,000 km.
The above actions should be repeated individually if a wheel has been
removed from the wheel axle.