PRONAR T314, Руководство пользователя

Страница: 28 / 114

Pronar T314, Pronar T315, Pronar T316 SECTION 2
2.6
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
Service inspections should be carried out according to the frequency specified in
this Operator's Manual.
•
Welding works may be performed only by persons having appropriate
authorisations for this type of works. There is a high risk of explosion during
welding works.
•
Before welding or electrical work, the slurry tanker should be disconnected from
the power supply, if the machine is connected to the tractor (disconnect the
tractor negative battery cable (-) or disconnect connection lead). The paint coating
should be cleaned. Burning paint fumes are poisonous for people and animals.
Welding work should be carried out in a well lit and well ventilated space.
•
In order to reduce the danger of fire or explosion, remove sediments accurately
from the slurry tanker and clean and vent the tank before welding works. Be
especially careful when welding and pay attention to flammable or fusible
elements (hydraulic system conduits, electrical system leads and other structural
elements made of plastics). If there is a risk that they will catch fire or be
damaged, they should be removed or covered with non-flammable material
before commencing welding work. Before beginning work prepare a CO
2
or foam
extinguisher.
•
Check condition of machine hydraulic system regularly, oil leaks are not allowed.
•
Before beginning repair works on hydraulic or pneumatic systems reduce oil or air
pressure.
•
In the event of work requiring the slurry tanker to be raised, use properly certified
hydraulic or mechanical lift jacks for this purpose. After lifting the machine, stable
and durable supports must also be used. Do NOT carry out work under a
machine, which has only been raised with the lift jack.
•
The machine must not be supported using fragile elements (bricks or concrete
blocks).