PRONAR NV161/1, Руководство оператора

Страница: 121 / 132

SECTION 5 Pronar NV161/1
│
NV161/2
│
NV161/3
│
NV161/4
│
NV161/5
5.37
ATTENTION
All conveyor chains must be equally tensioned.
Excessive looseness of conveyor chain may lead to serious damage to the manure
spreader and pose a direct threat to the machine operators or other persons.
5.8 MANURE SPREADER CLEANING
Carefully remove the remains of manure from the manure spreader daily after finished work.
Before using pressure washer the user is obliged to acquaint himself with the operating
principles and recommendations concerning safe use of this equipment.
Manure spreader cleaning guidelines
Immobilise manure spreader and tractor with parking brake, place chocks
under manure spreader wheel.
Turn off tractor engine and remove key from ignition.
Secure tractor against access of unauthorised persons.
Clean the manure spreader with strong water jet and leave to dry.
Using pressure washer increases washing effectiveness, but particular
care must be taken during work. During washing, washer nozzle may
not be closer than 50 cm from the surface being cleaned.
Water temperature shall not exceed 55
°
C.
Using excessive pressure for cleaning may damage lacquer coating.
Do not direct water jet directly at system and equipment elements of
manure spreader i.e. control valve, brake cylinders, pneumatic,
electric and hydraulic plugs, lights, electrical connections, information
and warning decals, data plate, conduit connections and lubrication
points etc. Great water jet pressure may damage these elements.
For cleaning and maintenance of plastic coated surfaces it is recommended to
use clean water or special preparations designed for this purpose.