background image

1

IMPORTANT SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

This symbol indicates that dangerous voltage 

instituting a risk of electric shock is present 

within this unit.

This symbol indicates that there are important 

operation and maintenance instructions in the 

literature accompanying the appliance.

Electricity may cause personal injuries and property damage 

if handled improperly. The screen has been engineered 

and manufactured with the highest priority on safety. But 

IMPROPER USE CAN RESULT IN POTENTIAL ELECTRIC 

SHOCK OR FIRE HAZARD. In order to prevent potential 

danger, please observe the following instructions when 

installing, operating and cleaning the product. To ensure 

your safety and prolong the service life of your screen, 

please read the following precautions carefully before using 

the product.

1. Read these instructions

---All operating instructions 

must be read and understood before the product is used.

2. Keep these instructions

---These safety and operating 

instructions must be kept in a safe place for future 

reference.

3. Note all warnings

---All warnings on the product and in 

the instruction manual must be observed closely.

4. Follow all instructions

---All operating instructions must 

be followed.

5.Attachments

---Only use attachments/accessories 

specified by the manufacturer. Do not use attachments 

which are not recommended by the manufacturer. Use of 

improper attachments can result in accidents.

6. Power source

---This product is intended to be supplied 

with a listed power supply indicated on the marking 

label. If you are not sure of the type of power supply at 

your location, consult your product dealer or local power 

company. For added protection for this product during a 

lightning storm, or when it is left unattended and unused 

for a long period of time, unplug it from the wall outlet and 

disconnect the cable system. This will prevent damage 

to the product due to lightning and power line surges. 

When the unit has to be used with another power supply 

voltage, the power cable must be changed. Consult your 

product dealer. The socket outlet should be installed near 

the equipment and easily accessible. Use only the power 

cord designated by our dealer to ensure safety and EMC. 

When connecting other products such as VCRs and 

personal computers, you should turn off the power of the 

unit for protection against electric shock.

7.Power cord protection

---Protect the power cord from 

being walked on or pinched particularly at plugs, wall 

outlet, and the point where they exit from the device.

NOTE:

 Where the mains plug or an appliance coupler 

is used as the disconnected device, the disconnected 

device shall remain readily operable.

8. Overloading

---Do not overload wall outlets, extension 

cords, or convenience receptacles on other equipment 

as this can result in a risk of fire or electric shock.

NOTE: 

Pay attention to children's safety. Keep power 

socket, plug away from children to avoid shock.

9. Entering of objects and liquids

---Never insert an 

object into the product through vents or openings. 

High voltages are present in the product and inserting 

an object can cause electric shock and/or short circuit 

internal parts. For the same reason, do not spill water or 

liquid on the product.

10.Servicing

---Refer all servicing to qualified service 

personnel. Servicing is required when the device has 

been damaged in any way, such as the power-supply 

cord or plug is damaged, liquid has been spilled, objects 

have fallen into the device, the device has been exposed 

to rain or moisture, does not operate normally or has 

been dropped.

11.Damage requiring service

---If any of the following 

conditions occurs, unplug the power cord from the 

AC outlet and request a qualified service technician to 

perform repairs.
a. When the power cord or plug is damaged.
b. When liquid is spilled on the product or when objects 

have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as 

described in the operating instructions.

Do not touch the controls other than those described 

in the operating instructions. Improper adjustment of 

controls not described in the instructions can cause 

damage, which often requires extensive adjustment 

work by a qualified technician.

e. If the product has been dropped or the cabinet has 

been damaged in any way.
f. When the product displays an abnormal condition or 

exhibits a distinct change in performance. Any noticeable 

abnormality in the product indicates that the product 

needs servicing.

12. Replacement parts

---In case the product needs 

replacement parts, make sure that the service person 

uses replacement parts specified by the manufacturer, or 

those with the same characteristics and performance as 

the original parts. Use of unauthorized parts can result in 

fire, electric shock and/or other danger.

13. Safety checks

---Upon completion of service or repair 

work, request the service technician to perform safety 

checks to ensure that the product is in proper operating 

condition.

14.Careful move

---When a trolley is used, be cautious 

when moving the trolley/device combination to avoid 

injury from the device tipping over. Sudden stops, 

excessive force and uneven floor surfaces can cause 

the product to fall from the trolley.

Never attempt to move the screen unless the AC  power 

cord has been disconnected.

Содержание PM-TL43A/PCAP





















Отзывы: