PRO 5 PB/PBE/PBC
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
11
3.3. Installing the motor
Insert the air motor into the machine (
1
, Fig. 4a) so that the arbor is placed in the
socket
2
, and tighten the motor by rotating it to the left (
3
).
Fig. 4.
Installing the air motor (a) and an electric motor (b)
To install an electric motor, slide the clamping ring
4
onto the machine. Then, screw
the driver (
5
) into the motor and insert the motor into the machine (
6
) by placing the
arbor in the socket
2
, and tighten the clamping ring with the 6 mm hex wrench (
7
).
Finally, set the rotation direction switch to the position shown in Fig. 1.
1
2
3
a)
b)
5
5
6
7
5
4
5
5
