Promix-SM104
6
See operating voltage range in 5.2. Avoid application of a higher voltage or
excessive pulse duration.
Example of lock mounting on a metal cabinet with a swing door.
6.2
CONNECTING PROCEDURE
The lock operation is controlled by means of energizing and de-energizing. For this purpose, a
controller (control board) or a switch (button) is generally used. The controller is mounted in
accordance with its certificate.
Connect the lock power wires adhering to the following polarity:
Red (black with a red stripe)
– positive pole of the power supply;
Black
– negative pole of the power supply;
Application of voltage of reverse polarity does not provide the lock operability but does cause
its failure.
Connect sensor leads:
Colored wires (yellow, green, etc.)
– door position sensor output.
Example of the lock connection to the remote control system Promix-RDS.
Lock
Door
Door
Lock
Cable
channel
Door
Lock
Cable channel
Lock
Controller Promix-CR.RX
Remote control
Promix-CR.TX
~220 V
