NEX
O
®
NLX1
ASSEMBLY INSTRUCTIONS
TAQUILLA
PUERTA TAQUILLA
NEXO NLX1
NEXO NLX1
CERRADURA DERECHA
CERRADURA IZQUIERDA
The NEXO NLX1 lock can be installed on doors with thicknesses between 9 mm and 20 mm.
The assembly of the lock in the locker door must be correctly carried out to ensure the correct operation of the lock.
The positioning of the holes, the distance of the lock on the locker body and the distance of the lock to the locking device, as shown in designs 1.2 and
1.3, must be correctly measured to prevent any subsequent problems when locking.
NEXO NLX1 LOCK INSTALLATION AND ASSEMBLY
Lock installation must be carried
out with screws in four drilled
holes.
Lock assembly depending on if
it is right handed or left handed
is as follows.
LOCK DIRECTION
