Promix-SM104
5
Insert the latch in the lock after prior centering
the latch bar and fitting the alignment piece 3
over the bar (see section 3).
Apply voltage to the lock and make sure that the
latch is pushed out of the lock.
De-energize the lock.
Remove the protective film from the two-sided
adhesive tape on the latch plate and snap the
latch into the lock. Close the door and press it
tightly to the cabinet.
Energize the lock. The door must become
slightly open.
Fasten the latch to the door with self-tapping
screws. Remove the alignment piece. The lock is
ready for operation.
2
3
4
