Promise Technology VTRAK 12110, Руководство пользователя

Страница: 131 / 264

Chapter 4: Management with WebPAM PRO
123
The Scheduler Information window appears.
7. Click the radio button to select the time interval (minute, hour, day, week,
month).
8. Make your settings.
•
For minute and hour intervals, specify the time period (30 to 59 minutes,
1 to 23 hours).
• For day, week and month intervals, specify the start time (using a 24-
hour clock).
• For week intervals, specify a day of the week from the dropdown menu.
• For month intervals, specify a day of the month from the dropdown
menu.
9. Click the Submit button when you are done.
The new scheduler settings will appear in the Scheduler tab.
To turn off the scheduler and disable scheduled synchronization:
1. Repeat steps 1 through 5 above.
2. Click on the Disable Logical Drive Synchronization Schedule radio button.
3. Click the Submit button.
Logical Drive List
The Logical Drives–Information tab gives a description and reports the status of
the logical drives that belong to this disk array. A disk array is a collection of
physical drives in a RAID. Logical drives are made from disk arrays. The PC's
operating system recognizes the logical drive as if it were a single physical drive.
You can write data to and read data from a logical drive in the VTrak enclosure as
if it were a physical drive inside the PC.
To see the logical drives under a disk array:
1. Click on the Subsystem icon in Tree View.
2. Click on the VTrak icon.
3. Click on the Disk Arrays icon.
4. Click on the Disk Array icon.
Click on the Logical Drives icon.
Logical Drive Parameters
• Device ID – The unique ID number for each logical drive.