Promise Technology Pegasus R4i Скачать руководство пользователя страница 151

Страница: 151 / 163

140

Promise

Technology

Pegasus R4i

To recreate your logical drive:

1. Identify the failed physical drive.

See “Locating a Physical Drive” on page 135.

2. Replace the failed drive.

See “Replacing a Drive Module” on page 135.

3. If the disk array had more than one physical drive, delete the disk array and re-create it.

See “Deleting a Disk Array” on page 137 and “Creating a Disk Array and Logical Drive with the

Wizard” on page 128.

4. Restore the data from your backup source.

Rebuilding a Disk Array

When you rebuild a disk array, you are actually rebuilding the data on one of its physical drives.

If there is no spare drive of adequate capacity, you must replace the failed drive with an unconfigured

physical drive, then perform a Rebuild manually.

See “Replacing a Drive Module” on page 135. To perform a manual rebuild:

1. Click on the

Background Activities

menu icon.

2. Mouse-over

Rebuild

and click the

Start

button.

3. From the

Source Physical Drive

dropdown menu, choose a

Source

disk array and physical

drive.

Arrays have an ID No. Physical drives have a Seq. No.(sequence number)

4. From the

Target Physical Drive

dropdown menu, choose a

Target

physical drive.

In the Confirmation box, type the word “confirm” in the field provided and click the

Confirm

button.

When the disk array is rebuilding:

•

The disk array shows a green check

icon and

Rebuilding

status.

•

Logical drives under the disk array continue to show a yellow !

icon and

Critical,

Rebuilding

status.

• If the buzzer is enabled, the Pegasus R4i unit emits two quick beeps every five seconds.

When the beeps stop, the rebuild is done.

Содержание Pegasus R4i



































































































































































Результаты поиска

Содержание Pegasus R4i

Отзывы:

Promise Technology Pegasus R4i, Руководство по эксплуатации продукта, Страница: 151 / 163

Результаты поиска

Содержание Pegasus R4i

Отзывы: