Promise Technology Pegasus R4i Скачать руководство пользователя страница 80

Страница: 80 / 163

Managing the Pegasus R4i

Pegasus R4i Product Manual

Making Individual Physical Drive Settings

To make individual physical drive settings:

1. Do one of the following actions:

•

Click the Physical Drive icon.

•

From the Device menu, choose Physical Drive.

2. Mouse-over the physical drive you want then click the

Settings

button.

3. Make changes as needed:

• Enter, change, or delete the alias in the Alias field.

• Choose Unconfigured or PassThru Configuration.

Unconfigured drives are not visible to your computer. Use them to make disk arrays.

PassThru drives are visible to your computer and are configured as individual drives. They

cannot be used to make a disk array.

4. Click the

Save

button.

5. Click the

icon to close the settings panel.

Physical Drive Settings

Содержание Pegasus R4i



































































































































































Результаты поиска

Содержание Pegasus R4i

Отзывы:

Promise Technology Pegasus R4i, Руководство по эксплуатации продукта, Страница: 80 / 163

Результаты поиска

Содержание Pegasus R4i

Отзывы: