Promise Technology Pegasus R4i Скачать руководство пользователя страница 146

Страница: 146 / 163

135

Troubleshooting

Pegasus R4i Product Manual

Locating a Physical Drive

To locate a physical drive:

1. Do one of the following actions:

•

Click the

Physical Drive

icon.

•

From the Device menu, choose

Physical Drive

2. Mouse-over and click the physical drive you want then click the

Locate

button.

The Status LED for the drive module holding that drive blinks blue and orange for one minute.

A failed physical drive displays a red X

icon in the Pegasus Utility and a red Status LED on the

drive module.

Check the failed drive, then obtain a replacement drive module.

Follow the instructions below if you want to remove a drive module from the Pegasus R4i MPX RAID

Storage Module, or to reinsert a drive module. You need to remove the drive module if you want to

replace it.

•

To unlock the drive module, slide the lock toward the center of the Pegasus R4i enclosure.

Note that each lock secures two drive modules - in the upper and lower drive module bays.

Replacing a Drive Module

Содержание Pegasus R4i



































































































































































Результаты поиска

Содержание Pegasus R4i

Отзывы:

Promise Technology Pegasus R4i, Руководство по эксплуатации продукта, Страница: 146 / 163

Результаты поиска

Содержание Pegasus R4i

Отзывы: