manualshive.com logo in svg

Promise Technology FastTrak TX4310, Руководство пользователя, Страница: 10 / 134

Поделиться
Скачать
Promise Technology FastTrak TX4310 Скачать руководство пользователя страница 10

FastTrak TX4310 User Manual

2

Product Overview

The PC which you are using either already contains a FastTrak TX4310 RAID 
Controller card installed by a third-party or you have acquired a FastTrak TX4310 
retail product for your existing PC and plan to install the card yourself. 
•

For PC owners wishing to install their TX4310 RAID, go to “Chapter 2: 
Installation” on page 7.

•

For PCs with a FastTrak TX4310 already installed, and you are experiencing 
any difficulties with the disk drives being recognized by the card, go to 
“Chapter 7: Support” on page 109. 

•

If your operating system has crashed for some reason or you have 
downloaded updated drivers from the Promise website (www.promise.com), 
you may wish to reinstall software drivers for the FastTrak TX4310. See 
“Chapter 3: Install Drivers” on page 23. 

FastTrak TX 4310

Promise originally designed the FastTrak TX4310 RAID Controller card as a cost-
effective, high performance RAID controller card that adds performance and 
reliability to PC desktops and servers using Serial ATA drives. FastTrak TX4310 
has four independent data channels to support a maximum of four Serial ATA 
drives and supports:
•

Stripe (RAID 0) – Identical drives can read and write data in parallel to 
increase performance. 

•

Mirror (RAID 1) – Mirror increases read performance through load balancing 
and elevator sorting while creating a complete backup of your files.

•

Stripe with Parity (RAID 5) – Combines data striping to increase performance 
with parity data to provide fault tolerance.

•

Mirror / Stripe (RAID 10) – Combining mirror with stripe offers both high read/
write performance and fault tolerance

A FastTrak TX4310 striped disk array can double the sustained data transfer rate 
of Serial ATA drives.

FastTrak TX4310 offers fault tolerant, data redundancy for entry-level network file 
servers or simply for desktop PC users wanting to continually protect valuable 
data on their PC.

Should a drive that is part of a mirrored or parity disk array fail, FastTrak TX4310 
uses the mirrored drive or the parity to assume all data handling. When a new 
replacement drive is later installed, FastTrak TX4310 rebuilds data to the new 
drive from the mirrored driveor parity to restore fault tolerance.

Содержание FastTrak TX4310







































































































































Отзывы:

Нет отзывов