manualshive.com logo in svg

ProMinent Hydro 3 Series, Руководство по эксплуатации, Страница: 32 / 96

Поделиться
Скачать
ProMinent Hydro 3 Series Скачать руководство пользователя страница 32

CAUTION!
Provide a separate power supply for the external fan with

motors with external fans (identity code specification "R" or

"Z").

Connect the motor as per the wiring diagram for the controller, if it is con‐

trolled by an electronic control unit (such as direct current motors by a fre‐

quency converter).

Connect the motors in accordance with the enclosed wiring diagram or as

per the wiring diagram fixed to the inside of the housing.

CAUTION!
Only operate stroke length actuators / control drives when

the pump is running!
Otherwise they will become damaged.

WARNING!
Danger of electric shock
In event of a defect, there is a risk of electric shock when

conductive feed chemical are used.
–

For safety reasons we recommend connecting to a pro‐

tective low voltage, e.g. in accordance with EN 60335-1

(SELV ).

WARNING!
Risk of fire after a diaphragm rupture
The electric diaphragm rupture sensor must switch off the

pump immediately after a diaphragm rupture.
–

Connect the pump and the diaphragm rupture sensor to

a control so that the pump is stopped immediately in the

event of a diaphragm rupture.

CAUTION!
Danger resulting from unnoticed diaphragm rupture
If the pump has been ordered with an electric diaphragm rup‐

ture sensor, it must also be electrically installed.
–

Install the enclosed diaphragm rupture sensor electri‐

cally to a suitable monitoring device.

CAUTION!
Additional damage with a ruptured diaphragm
The diaphragm cannot be allowed to rupture fully if damage

can be caused by hydraulic oil mixing with the feed chemical.
–

The diaphragm rupture sensor must switch off the pump

immediately.
Only restart the pump once the diaphragm has been

replaced.

External fan

Variable speed motors with frequency

converter

Stroke length actuators / control power

ends

Diaphragm rupture sensor (Option)

Installation

 

 

 

32

Содержание Hydro 3 Series

































































































Отзывы:

Нет отзывов