promethean Activesound One Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 44

promethean Activesound One Скачать руководство пользователя страница 34

34

Installing the Bracket

Installing MTBR-07S(BT77) Bracket for Infrared Portable Amplifier

Please carefully read the following assembly, installation and safety instructions

before installation of MTBR-07S Bracket for Infrared Portable Amplifier.

1.

Installation Surface

– The enclosed accessories are suitable only for

attaching to walls made of solid concrete or wood studs. Do not install to

sheet rock or wood panel.

2.

Tighten all the nuts using appropriate wrench.

3.

Make sure that

MTBR-07S Bracket

is installed so the tray is above

average head height and doesn’t disturb free movement in hallways.

4.

You must test the

MTBR-07S

Bracket

before

setting Infrared Portable

Amplifier BD-09.

5.

The maximum weight allowed on the mount is 55 lbs.

6.

Check that the Infrared Portable Amplifier BD-09 is securely fastened to

the bracket so it will not fall forward.

7.

One month after installation and every six months after that, check that

MTBR-07S Bracket

is securely fastened to the wall and the screws and

nuts are not loosening.

In case of weakening, remove Infrared Portable

Amplifier BD-09, and strengthen all the points that have weakened.

8.

Before reinstalling

MTBR-07S

Bracket, remove the Infrared Portable

Amplifier BD-09 first and then remount according to this manual

instructions.

«
...
32
33
34
35
36
...
»

Содержание Activesound One













































Отзывы:

Нет отзывов