
29
Installing the sensor: Part 3
The sensor can be installed on the infrared portable amplifier.
1. Install the sensor on the Infrared Portable Amplifier.
Put the coaxial cable and the anchor strap into the top hole and pull them out from behind.
Face front “frequency selector switches” of the sensor, and put the installation screw
through the sensor and screw it into the Infrared Portable Amplifier. Tighten the screw.
Screw tightening torque: 1.18 N
・
m±±0.2 N
・
m
(
12 kgf
・
cm±2 kgf
・
cm
)
2. Connect the coaxial cable to the sensor input terminal.
3. After installation, make sure nothing is loose. Do a visual check and make sure that
nothing is unsteady and the installation screw is tight.
Installation
Installation screw (M4 x 40mm)