33
AEH-07
AERC-07
(5) Battery case
(10) frequency
selector switch
(Inside the battery case)
(1) Frequency selector switch
The Channel 3/Channel 4 settings cannot be used on the portable infrared amplifier, so
set Channel 1 or Channel 2 when you are using the infrared portable amplifier then the
frequency settings for the sensor and the infrared wireless microphone are as follows:
1ch: 2.30 MHz, 2ch: 2.80 MHz.
●
Remove the case of the infrared wireless microphone and set the transmission
Frequency.
Use the frequency setting switch to select the desired transmission channel.
Position [1] = Channel 1: 2.30 MHz, position [2] = Channel 2: 2.80 MHz
Position [3] = Channel 3: 3.20 MHz, position [4] = Channel 4: 3.80 MHz
Suggested settings :
Ch
1
for
AERC-07
Ch
2
for
AEH-07
●
Setting the sensor's reception frequency.
The reception frequency changes when the position of the frequency setting
switch is changed.
[1/2] position = Channel 1: (2.30 MHz)/Channel 2: (2.80 MHz)
[3/4] position = Channel 3: (3.20 MHz)/Channel 4: (3.80 MHz)
10
5
10
5
1
Setting the Frequency