1.E. Environmental Requirements
Operations, Shipping and Storage Conditions
•
The instrument is intended for indoor use only.
•
Install on a sturdy, dust-free, level surface.
•
Do not install in a location where there is large temperature variability or
high humidity.
•
Position the instrument so that it is easy to unplug from the power
source.
•
Do not place the power supply in areas where it may come in contact
with liquid.
•
Do not place next to heat sources.
•
Do not use near flammable gases or liquids.
•
For optimal performance, we recommend equilibrating the instrument to
operating temperature before use.
2.
Quantus™ Fluorometer Inspection and Setup
Upon receiving your Quantus™ Fluorometer, inspect everything carefully and
make sure all items are present and undamaged.
2.A. Setting Up the Quantus™ Fluorometer
1.
Position the Quantus™ Fluorometer on a flat surface.
2.
Select the appropriate outlet adapter for your wall outlet from the Outlet
Adapter Kit provided.
Promega Corporation
·
2800 Woods Hollow Road
·
Madison, WI 53711-5399 USA
Toll Free in USA 800-356-9526
·
Phone 608-274-4330
·
Fax 608-277-2516
·
www.promega.com
Part# TM396
Printed in USA.
Page 6
Revised 1/20
Operating Conditions
15–30°C, up to 75% humidity
Operating Altitude
Up to 2,000 meters
Shipping and Storage Conditions
5–40°C under noncondensing
conditions, up to 75% humidity
Maximum Relative Humidity
Up to 80% for temperatures up to
31°C, decreasing linearly up to 50%
relative humidity at 40°C
MAINS Power Supply
Supply voltage fluctuation up to ±10%
of the nominal voltage
Transient Overvoltage
Up to the level of Overvoltage
Category II
Temporary Overvoltage
Occurring on the MAINS power
supply
Pollution Degree
Pollution Degree 2
TM396.0120_EIVD_TM.qxd 1/27/2020 2:50 PM Page 6
