ProMed AL-1300 WS, Инструкция

Страница: 13 / 92

13
DE
EN
FR
IT
ES
NL
RU
PL
SE
AR
Please check that the delivery is complete before commissioning.
Only use original parts!
Caution
Only 100% essential oils and/or fragrance compositions (e.g.: Promed fragrance oil
compositions) may be used as fragrance oils.
Note
The device may be used with tap, demineralised and distilled water. When using tap water,
you should absolutely observe the section on decalcifying in the care instructions. When
using demineralised or distilled water, you will not need to decalcify the device.
1. To operate, open the device by pulling the device cover / water tank (A) from the base
(D) .
2. Now, fill the water tank (A) by unscrewing the water tank cap (B) and then pouring in
water (max. 1.3 L). Then add 10 -15 drops of the desired scented oil.
Caution
The device should only be filled with liquid in this way.
3. Now, screw the water tank cap (B) back onto the water tank (A) and places this back on
the base (D) .
4. In order to operate the device, insert the power adapter plug (J) into the power adapter
bushing (H) and the power adapter (I) into the socket. The aroma diffuser is now ready
for use.
5. Functions of the two control sensors:
Note
Every time you push the sensor button, this is acknowledged with a “beep” sound.
On/off sensor button
You turn the device on by pushing the on/off button (F) once and this starts the maximum
nebulisation mode. The device switches to the minimum nebulisation mode if you push the
button again. To switch the device off, push the button again.
Caution
The device may only be switched on when the water tank is filled correctly. If there is not
enough liquid in the water tank, the device flashes 3 times.
OPERATING THE UNIT
SPECIAL QUALITY FEATURES