ProMed AL-1300 WS, Инструкция

Страница: 14 / 92

14
DE
EN
FR
IT
ES
NL
RU
PL
SE
AR
Light sensor button
By pressing the light button (E) once, you switch on the light and all 7 colours change
automatically. By pressing the button a second time, the colour change stops on the current
colour. To switch off the light function, push the button again.
Caution
The mood light can also be switched on via the light button (E) if the water tank is empty.
CARE INSTRUCTIONS
The device should be cleaned after 5-6 uses and/or every 3-5 days.
• Pull the mains plug before cleaning.
• Empty the device and make sure not to pour out any water on the air outlet side (see fig.
below). Then use a cloth to dry the water tank.
• Rinse the water tank with clear water when you want to change the fragrance. In this
way, different fragrances won’t mix up.
• Clean the outer surface of the device only with a soft, damp cloth. Subsequently rub it
dry with a soft, dry cloth.
• Do not use brushes, aggressive cleaning agents, benzine, diluent or alcohol.
G
Decalcifying
• Decalcify the device after every fifth or sixth use or every 14 days. Proceed as follows:
1. Disconnect device from power supply.
2. Fill the water tank with a maximum of 300 ml water and add 2 teaspoons of citric
acid.
3. Let liquid work in for fifteen minutes.
4. Pour liquid out and rinse with water if applicable.
• If you have any questions, please contact our service department.
• In case of malfunction or defects, please send the device to the manufacturer.
OPERATING THE UNIT