StudioAlbums
Page
6
Clixx’Pixx DrillPunch Pro2 4-12” 56-1012
5. Exchange punching dies
1
4
7
8
9
5
6
3
2
Pull PunchAlignmentBar down and
towards you, so it gets out of your
way, as shown on picture 2.
This is how you remove PunchHolder
and punch from the machine.
The head of the punch must glide into
the rail as indicated.
Push in PunchHolder hard
and tighten screw firmly. Then
rearrange PunchAlignmentBar and
TensionRubberBand. Make sure is it
arranged as on picture on page 2 top
picture.
Important: Both punches are
calibrated in the machine. The right
position Punch holder is marked
with a red dot. Do not switch to the
left position!
Tilt PunchHolder again like shown and
carefully move assembly into machine.
Now replace the old punch with a new
one.
Loosen PunchHolderScrew as
indicated..... and tilt the PunchHolder a
little towards you.
This is legal information to potential licensees and business partners and not intended to be an advertising message:
PROMAXX® reserves all rights to the design, function and materials of these photo systems to the extent international patent laws allow. German utility models have been applied in
DE covering the PhotoBook covers, the Clixx‘Pixx Ring System and other proprietary features to allow for worldwide patent protection of these proprietary technologies. PROMAXX®
and Clixx´Pixx® are registered trademarks of PROMAXX® Innovative PC Print Media GmbH, Dietersheim / Munich, Germany. Potential business partner‘s contacts welcome.
All statements, technical Information and recommendations about PROMAXX® products are based upon tests believed to be reliable but do not constitute a guarantee or warranty. In
no event shall PROMAXX® be responsible for claims beyond the replacement value of the defective product or in any way liable or responsible for consequential or incidental dama-
ges. All marks and product names may be trademarks of their respective owners.
PROMAXX® all rights reserved.
PROMAXX® Innovative PC Print Media GmbH
Hauptstr.1e • 85386 Dietersheim / Munich • Germany
Fon +49 89 3075 8698 • Fax +49 89 9595 9712
e-mail [email protected]
www.promaxx.de www.clixxpixx.com
Art.Nr. 56-1103
Spare Punching Set Pro2
6,2 mm hole / 4pcs.
Art.Nr. 56-1104
Counter Pressure Disks
Pro2 / 20pcs.
Ordering
Spare
Parts
