►
Align the Pile now on the right Limiter Block and
punch the Pile the second time.
12“ Prints are drillpunched 3 times,
with a total of 6 holes
►
Arrange all prints of a book in a clean square pile.
►
Push stack in the left upper corner and make sure all
sheets stay square in the stack.
►
Push handle slowly and punch the pile once.
►
Remove Limiter Blocks for Sizes 12” and A4
StudioAlbums
Page
4
Clixx’Pixx DrillPunch Pro2 4-12” 56-1012
Drill binding holes
8”
(203mm) print height:
Drill binding holes
12“
(304mm) print height:
8” Images are punched two times.
►
Arrange all prints of a book in a clean square pile.
►
Use the left Limiter Block as shown and punch the
pile once .
►
Now insert 12” alignment block as shown as a spacer
and repeat steps above.
►
Now turn 12” alignment block as shown and repeat
steps above.
1
2
3
2
1
