QUICK CONFIGURATION GUIDE.
DT-101B/102B
02/2012
Page 7
3. NAVIGATION AND EDITION OF VALUES
3.1 Control
Module
The
DT-800
control module configures the
DT-101B/102B
module:
1.-
After assembling and connecting, turn on the
DT-800
. After
scanning, check the
DT-101B/102B
module appears in the list of
modules shown on the screen.
2.-
Press
ENTER
to get into the
Password
option and enter the
access password (password by default “2008”). If the password is
right you will access to the configuration menu.
3.-
Use
RIGHT
or
LEFT
to move among modules, until
finding the
DT-101B/102B
. The LED “
Program
” of the
DT-
101B/102B
module
should be flickering when the module appears
on screen.
4.-
Press
ENTER
to get into the configuration option of the
DT-101B/102B
.
For more information, refer to the manual supplied with the
DT-800
module control.
3.2 Navigation through the configuration menu
4. Press the
LEFT
or
RIGHT
key to move among the menu
options.
5. To exit a menu option, press the
ENTER
or
DOWN
key.
6. To validate a change and exit, press the
ENTER
key.
7. To exit without validating press the
ESCAPE
key.