QUICK CONFIGURATION GUIDE.
DT-101B/102B
02/2012
Page 5
2. SAFETY RULES
2.1 General
∗
The safety could not be assured if the instructions for use are not
closely followed.
∗
Use only with other DT series modules and for power supply and Control
those indicated at the Specifications.
∗
Remember that voltages higher than
70 V DC
or
33 V AC rms
are
dangerous.
∗
Use this instrument under the
specified environmental conditions
.
∗
The user is not allowed to perform changes inside the equipment. Any
change on the equipment must be done exclusively by specialized staff.
∗
Do not obstruct the ventilation system of the equipment.
∗
Use appropriate low-level radiation cables for input / output signals,
especially on high level signals.
∗
Follow the
cleaning instructions
described in the Maintenance
paragraph.
*
Symbols related with safety:
