QUICK CONFIGURATION GUIDE.
DT-101B/102B
02/2012
Page 3
RF Output
(DVB-T)
Type
1 DVB-T multiplex (
DT-101B
) or 2 DVB-T
independent combined multiplex (
DT-102B
).
Conector
BNC female, Impedance 50
Ω
.
Frequency Range
From 474 to 875 MHz, in 1Hz step (see Options
for output in VHF band).
Power level
(average) Aprox. 85 dBµV without attenuation.
Variable attenuation from 0 to 30 dB (in 1 dB
step).
Frequency Stability
10
ppm.
MER
>37 dB from 650 MHz to 860 MHz.
>39 dB from 474 MHz to 650 MHz.
Noise Phase SSB
87 dBc/Hz at 2 kHz.
Transport Stream Processing
Basic Functions
PID Filtering
Filtering Table up to 32 PID.
TS Measures
Bitrate of the Output Multiplex.
Percentage of used bitrate (relative to the
maximum capacity of the multiplex).
Advanced Functions
(Available only when it
is connected to a
DT-3XX
receiver)
Selection of Services by Name or streams
filtering by PID.
Automatic Regeneration of PAT and SDT tables
NIT table adaptation:
NID (Network Identifier) editable.
Management of LCN (Logic Channel Number) for
each module and service.
Configuration
Through
the
DT-800
Control Module in local
(keypad) or remote mode (PC). (See
DT-800
specifications)
Power Supply
Via
the
DT-800
Control and Power module
Connector
JST B08P-XL-HDS (Connecting Cable supplied
with the
DT-800
module)
Voltage and highest
Consumption
+12 V, <0,55 A;
+5 V, <1,4 A.
