Promaster Timer Remote 4964, Руководство пользователя

Страница: 16 / 20

Starting the timer - wireless operation
After making the settings for the desired function, press the START/STOP button of the transmitter. The
transmitter will send the setting data to the receiver. Once the data is in the receiver, it will start and
“TIMER ACTIVE” will flash in the control panel of the receiver. Between shots, the control panel will show
the time remaining until the next photograph is taken. If the transmitter speaker is ON, a beep will sound
three times at ONE-SECOND intervals before the shutter opens.
While the shutter is open, the control panel will show the time remaining until the shutter closes, and the
release lamp and
“RELEASE” indicator will flash at ONE-SECOND intervals. The number of exposures
remaining will be updated each time a photograph is taken.
1. Flashes while timer is active
2. Between shots: Time remaining until next
shot. While shutter is open: Time remaining
until shutter closes.
3. Number of shots remaining
4. Flashes while shutter is open