Promaster Timer Remote 4964, Руководство пользователя

Страница: 7 / 20

Setting the wireless channel on the transmitter

Turn on the power. The default channel is
the last channel set.

Use the arrow button to set the channel.

Press left or right button to move the
selection cursor until it disappears.

The channel section will display.

Press the SET button to go into the
Channel section. When the Channel
number is flashing, press the up or down
button to increase or decrease.

Press the SET button at any time to
complete the operation and display the
new setting for the selected item.

The channel of the transmitter and
receiver must be the same for proper
operation.
Setting the wireless channel on the receiver
1. Turn on the power. The default channel is
the last channel set.
2. Press channel Increase button or channel
reduce button to set the channel.
3. After pressing either of these buttons for 2
seconds, the receiver will save the current
channel as default channel.
4.
The channel of the transmitter and
receiver must be the same for proper
operation.
Selecting wireless or wired operation
Your ProMaster Multi-Function Wireless Timer Remote can be used in either a wireless mode with
an operating distance of up to 328’ (100 meters) or as a wired remote. In either case, in order to
operate, it REQUIRES the purchase of a ProMaster Camera Release Cable to fit your particular
camera.
See the following to set up your remote for wireless or wired operation.